Whats crackin Notch!!!!! #7 in da house!

---

Whats up my brother from another mother!

---

^^ we got to patch that Notch in.
What up NN

---

Vic, where in the meat puppets are you? For fucksake or for sake's fuck, the fuuuuuuck? You don't have, don't tell me...

Shell It Out Syndrome?
The Can'take It Disease?

---

Guys just chill. None of you know my plan. I just got the parts to finish my 2nd set of rims today. The idea is basically have to have 2 sets of rims to get and have the tires ready to just swap out when the old ones wear out. The problem was a couple shipments took longer than expected (as I think I mentioned here...or elsewhere some idiot sent my rear rotor/abs ring to someone else or wahtever..I had to order a second one from someone else. It just came today.)

It's all good. I have quite a bit in the hopper atm. But weathers pretty much crap anyway so it's really none the worse. Last Saturday was the last really ridable day anyway (it snowed 5"s in the last 2 days).

So chill out. Hub, look brother, don't take anything too personal. You know I got respect for you bro.

So chill out. Hub, look brother, don't take anything too personal. You know I got respect for you bro.

I'm sure it's mutual?

* Last updated by: Wolfman on 3/24/2015 @ 6:19 PM *

---

I think we all would love two ecu and two sets of rims. I would prefer a nice aftermarket set and a retained stock set. Not just two sets of stockers. But realistically do what u like. That's key.

---

LOL for real wolfman. Seriously. You're named wolfman. Can't take you very seriously. Like you got that nickname in HS and stll think it's like the shit or something. Wolfman..LOL. Ever wonder how many dicks go by wolfman? All of them.

And Vic thing, dick thing, eat a dick vic is of course original and clever you low life, trench crawling fat rat.

---

Me dad used to say, son be confident in who you are. You are what u are. Accept it, and don't be afraid to be that kind of man. Everyone in my family calls me that, friends, and people I work with. For better or worse it's me name. My dad also said, whenever people criticize you, consider the source. If you respect them enough to value their opinion, listen. Forgive me if I just shrug my shoulders at you and fart.
Night Vic

---

Green no need to say what is common knowledge, but thanks for the love homie!

---

Wolf,your dad sounds like a very smart man.

---

So chill out. Hub, look brother, don't take anything too personal.

That's just Hub's way of getting YOU broken in. Hell, you should have seen him in the old days. "Look Rook, you're a ROOKIE! You need to be schooled." ...and that was the nice part. So schooled, I have been and continue to be.

* Last updated by: Rook on 3/24/2015 @ 8:10 PM *

---

Vic, That short loft vid was impressive in a snowflake kind of who is it? The flash should get you to some point of cancellation of the flash unit or no unit will help. You have a lofting freak. Mine will not do that. I tried the other day and by clicking back to the stock ECU, stock wire harness, it's not there. This is something you should recognize and report. Did the flash move the grunt, cough, haaaack?

Rook, on a score of fa-fa-fuck, that PHIL put out a trench of a talk LOL... Score?

---

Lol, that thing aint a lofting freak. Put ur bike in firet gear. Same thing. Its 1441cc's. Stock it popped the front end up a little(we are talking inches here), then the video cuts before the huge throttle chop is evident. Thats all. Nothing special. Carry on.

---

I though he was in second going to third? And he said F-1 not F-off. I could be mistaken because I'm not seeing all of it. I head up a lot of ramps and that means from first, turn the corner and then up the ramp and blend in. So if I were to mimic Vic's throttle opening, it does not sound like a grumble of air at the snout intake. The body language does not seem aggressive.

Again, I'm not agreeing with Vic or disputing Vic. Show me the seconds and let me take a forensic ride sort of no coals in the fire on my end. More an observer of the telemetry.

---

Lol, that thing aint a lofting freak. Put ur bike in firet gear. Same thing. Its 1441cc's. Stock it popped the front end up a little(we are talking inches here), then the video cuts before the huge throttle chop is evident. Thats all. Nothing special. Carry on

Bingo bango. Eat a dick vic

---

Well, Vic, seems you were right. They don't see it. Now, take all the time you need with the ordering and all that. The whole point now is to duplicate that event you said happened a few times. There are how many variable here?

1. The flash mimics the OE and there is no change.
2. The flash never does it even in the closest duplication of the video.
3. The OE once again, repeats a loft when the video is met or just outperforms the flash vs a low loft matching move.

In video copycat someone wins in the instant pullup-no body english applied.

---

Put ur bike in firet gear. Same thing. Its 1441cc's. Stock it popped the front end up a little(we are talking inches here),

I have the Gen 1 but even with 45T, it won't come off the ground at that low of an rpm without feathering the clutch. Vic, I'm pulling that Autotune out soon and do it all the way this time.

* Last updated by: Rook on 3/25/2015 @ 11:46 AM *

---

I have the Gen 1 but even with 45T, it won't come off the ground at that low of an rpm without feathering the clutch. Vic,

Rook, really ? 17/45 your bike should flip over at will. You don't know what you have been missing. 2008 to 2015 long time not knowing. How are you doing it ?

Vic, I'm pulling that Autotune out soon and do it all the way this time.

Curious, what will this do ?

Rook, really ? 17/45 your bike should flip over at will. You don't know what you have been missing. 2008 to 2015 long time not knowing. How are you doing it ?

IDK? Maybe that partially explains my tire longevity. I've never gotten less than 6,000 miles out of a rear tire. The busa with stock 17/40 gearing wheelies a little easier. I suspect my Autotune adjustment wasn't spot on but we'll take care of that soon. Maybe when you do my flash, you could email me your fuel map. I'll start with that instead of mine and Autotune from there. It will probably make the process a lot simpler.

Curious, what will this do ?

Hopefully 0 out all my trims. IDK if they were all at 0 when I accepted the trims and I never went any farther with it. The bottom end seemed to be fixed so i was pretty happy. That was back in the days when I used to ride the bike. LOL

* Last updated by: Rook on 3/25/2015 @ 4:13 PM *

---

Maybe when you do my flash, you could email me your fuel map.

No time like the present. Map Sent.

Cool. Got it. My computer cannot find an application to open the attachment but I am sure that is because this is my Mac which does not have my DJ software. I will store that on a thumb drive and bring it over to the PComputer. Think I will try my map and then your map before I even do the flash. Gotta get the bike running soon!

That is full exhaust and flies out map, right?

* Last updated by: Rook on 3/25/2015 @ 6:02 PM *

---

Finished up tire/rim project, except I sitll have to get the OE rims ready for new toors. Break em in the I'll put in my CBlast ECU and let her rip!!!

Evora's got her new shoes on...and she's look'n hot in black!

Detailed everything while she was part

Her rear was dirty from running her pretty hard...

But I cleaned her up...

Before

After

Whoot!!!

* Last updated by: VicThing on 3/26/2015 @ 7:12 PM *

Vic,
You look almost as meticulous with your bike as I am.
Almost...

---